Shoring Post Rental for the London, ON Area
Equipment Rental Brothers offers shoring post rental for the London, ON area with adjustable steel posts in sizes 00 through #2, covering temporary structural support applications from roughly 3 feet to 12 feet. These are used for underpinning, beam replacement, basement lowering, floor system repair, and other work where temporary load transfer is required. Rentals are available from our Otterville, ON yard.
Common Applications
Shoring posts are commonly used for:
- underpinning and basement lowering
- beam and girder replacement
- floor system repair and reinforcement
- temporary support during structural renovation work
These are practical field tools used on real structural-support projects, especially where loads must be held temporarily while work is completed below or beside the structure.
Size Guide
Available size ranges include:
- Size 00: approximately 3 to 5 feet
- Size 0: approximately 4 to 6.5 feet
- Size 1: approximately 5.5 to 9 feet
- Size 2: approximately 7 to 12 feet
Measure the full bearing height before booking so the correct size can be confirmed.
- Type: Adjustable steel shoring posts
- Available Sizes: 00 through #2
- Approximate Height Range: About 3 feet to 12 feet depending on size
- Best For: Underpinning, beam replacement, structural temporary support
- Setup Requirement: Must be installed plumb on solid bearing
- Engineering Note: Structural configuration should be reviewed where required
Book
Common Applications
Shoring posts are commonly used for:
- underpinning and basement lowering
- beam and girder replacement
- floor system repair and reinforcement
- temporary support during structural renovation work
These are practical field tools used on real structural-support projects, especially where loads must be held temporarily while work is completed below or beside the structure.
Size Guide
Available size ranges include:
- Size 00: approximately 3 to 5 feet
- Size 0: approximately 4 to 6.5 feet
- Size 1: approximately 5.5 to 9 feet
- Size 2: approximately 7 to 12 feet
Measure the full bearing height before booking so the correct size can be confirmed.
Measure from the top bearing surface to the bottom bearing surface and choose the post size whose adjustment range covers that height.
For structural applications, especially underpinning or regulated work, engineering review is strongly recommended and may be required.
That depends on the floor system, carrying beam, joist span, and structural load. Your engineer or qualified contractor should determine the spacing and count.
.jpg)